Tag Archives: best gear

China Best Sales Portable Concentric Ground Hydro Post Auto Wash Cylinders Scissor Gear Two in Car Pump Lift for Truck Hydraulic Hoist Krm143A hydraulic cylinders design

Product Description

Hoist Mechanism,Dimensions & Mass(appros.)
 

L(mm) W(mm) H(mm) X(mm) MASS(kg)
1180 402 340 391 120

Hoist Cylinder and Pump Combination Specification (approx.)
 

 

 

 

 

Hoist Cylinder KRM143

Working Pressure   (MPa)

               (Kgf/cm2)

6.4

 

 

 

Gear Pump KP-55

Standard Revolution

(rpm)

800

65

Inner Diameter     (mm)

140

Discharge Volume(ml/rev.)

55

Stroke            (mm)

520

Max. Testing Pressure     (MPa)

 (Kgf/cm2)

 

20.6

Min. Close distance (mm)

795

210

Piston Rod Diameter   (mm)

70

 

Weight(kg)

 

13

Max. pressure     (MPa)

               (Kgf/cm2)

14.7

150

 

Hoist Mounting and Maximum Lifting Capacity

 

Recommended Truck G.W.(kg)

Body Length(mm)

Rear Overhang(mm)

Distance between Load Center to Hinge(mm)

Distance between trunion to Hinge(mm)

Rated Lifting Capacity(kg)

Designed Max. lifting Capacity(kg)

(including load weight)

6000-9000

3400

400

1300

1100

4000-5000

8500/60°

Type: Hoist
Structure: Hydraulic Jack
Capacity (Load): 1-10T
Power Source: Hydraulic
Condition: New
Transport Package: Pallet
Customization:
Available

|

Customized Request

hydraulic cylinders

Different Types of Hydraulic Cylinders

Generally, hydraulic cylinders are used in manufacturing machinery, construction equipment, and civil engineering. They are also used in elevators, and to provide unidirectional force.

Single-acting vs double-acting

Whether you are deciding on single-acting vs double-acting hydraulic cylinders for your application, it is important to understand the differences between the two so that you can make an informed decision. There are a number of advantages and disadvantages to both types, so choosing the right one for your application can be difficult.
Single-acting cylinders use compressed air to force the piston rod to extend, while double-acting cylinders use hydraulic fluid to actuate the piston rod. The piston rod is then returned to its original position after the pressure is released.
Double-acting cylinders have two ports that connect to the piston rod. Hydraulic fluid is pumped into the first port to extend the piston rod, while the second port provides pressure to the piston rod to retract it. The fluid exits through the other port. The cylinder’s pressure can be increased by increasing the fluid flow through the cylinder. This can also increase the speed of the cylinder.
Single-acting cylinders are cheaper to manufacture and install than double-acting cylinders. They are also easier to maintain. They also use fewer seals and valves than double-acting cylinders. However, they have a limited amount of control during operation. They also require a control system consisting of position valves. They are commonly used in reciprocating engines, hydraulic rams, and pumps. They are also useful for lifting equipment, lift shafts, and steering mechanisms.
Single-acting cylinders also have a certain rest state. If the power goes out, the cylinder will return to its resting position. However, if the springs wear out or the internal components break, the end of the stroke may be uncertain. This can be dangerous during power outages.
Unlike single-acting cylinders, double-acting cylinders provide stronger control and flexibility. They can be used in virtually any machine application. They are particularly useful for robotics, medical, and industrial tasks. They also provide more design options. They are also more energy efficient, but have a higher cost. They are also often more durable than single-acting cylinders.
Double-acting cylinders are available in a variety of sizes and designs. They are often used to control steering in excavators and TLBs. They are also used to move merchandise off conveyor belts. They are available in lightweight and high-tonnage models. They can also be used to control booms on TLBs. They have ISO standards compliance. They can also be converted to single-acting cylinders, if desired.
Single-acting cylinders are generally cheaper to manufacture and install, but they do not offer the same level of control as double-acting cylinders. They are also easier to repair, so they are often used in fixed applications. They are also available in a variety of sizes, including low-height models. They are also available in a variety or styles, including telescopic hydraulic cylinders. They are also available in many different applications, including lifting equipment, dump trailers, and platform truck trailers.hydraulic cylinders

Stainless steel vs steel

Stainless steel and steel hydraulic cylinders are both durable materials that offer many benefits to users. These hydraulic cylinders are used in a number of different industries, including food and beverage processing. The food processing industry has very strict guidelines for cleaning equipment, so stainless steel hydraulic cylinders are preferred.
Stainless steel is a material that is non-porous, which means that it prevents bacteria from settling on the surface of the cylinder. This is important because food processing equipment needs to be clean to ensure the safety of consumers. A stainless steel cylinder is also a good choice for areas that are susceptible to corrosive chemicals.
Another advantage of stainless steel is the tensile strength of the metal. This makes it perfect for hydraulic applications that produce high temperatures. It also has excellent heat resistance. While the material can easily withstand the heat, it may not be as durable in humid or wet environments. In these conditions, nitriding is used to increase the surface hardness of the metal. In addition, special construction may be used to reduce oxidation.
While stainless steel hydraulic cylinders are used in many industries, the food processing industry is among the most common. Food processing equipment is heavily used, and stainless steel ensures that components will last. This is particularly true in environments that frequently require washing.
One of the best features of stainless steel is its resistance to corrosion. Its alloy composition contains at least 10% chromium, which helps create a thin layer of chromium oxide. This oxide layer protects the metal from rusting, and it also improves the self-repairing qualities of the material. The alloy also contains molybdenum, which creates a non-porous surface. This is important in food processing equipment because it prevents food particles from adhering to the surface. It also helps eliminate downtime due to contamination.
Stainless steel hydraulic cylinders are also durable, and they can withstand frequent cleaning. They are also used in equipment that is washdown-ready. The cylinders’ surfaces may be polished to achieve a satin finish, which is noticeable by fine, uniform grit lines across the stainless steel. The surface may also be coated in a variety of paints. This helps prevent bacteria from settling on the surface of the metal, and it also prevents food particles from sticking to the cylinder.
Another benefit of stainless steel hydraulic cylinders is that they can be used in environments that are highly contaminated with corrosive chemicals. They are especially suited for offshore oil rigs, where they are exposed to aqueous corrosion. They are also favored for use in the metals industry, as well as in pulp and paper mills. They are also used in a number of other applications, including cold press juicers and chocolate molding machines.
Stainless steel hydraulic cylinders also tend to have a streamlined design. They also may have end caps, which help prevent catch points and mounting holes. This prevents bacteria from settling on the surface and helps to eliminate downtime due to contamination.hydraulic cylinders

Coating

Whether you are an engineer or an owner of hydraulic cylinders, you know the importance of protecting your components from corrosion and wear. Hydraulic cylinders are designed to perform in high temperatures and high pressures, and they can be damaged by environmental conditions or mechanical deformations. The proper coating of hydraulic cylinders is essential to reduce wear and tear, and reduce the risk of corrosion and adhesion. If your hydraulic cylinders are damaged, the result can be expensive repairs.
Hydraulic cylinders are used in a variety of industries, including automotive, aerospace, marine, oil and gas, and offshore. The cylinders are primarily designed for high cycle applications, which can increase wear. However, they can be used in other types of applications as well.
There are several coating methods available on the market. One process is the electro galvanizing process. This process involves the use of electricity to deposit a zinc coating on the hydraulic cylinder. This coating can protect the cylinder for a lifetime. There are several methods to choose from, depending on the thickness of the coating.
Another method is the electro-plating process. This method has been used to coat hydraulic cylinders for offshore applications. However, the European Union nearly banned the process due to environmental concerns. The process is also used to coat corrosion resistant nickel-based alloys. Using this technology allows companies to coat hydraulic cylinders without having to involve a coater. The process is also easy to integrate.
One alternative coating process is thermal spray. This process uses engineered materials to deposit metallic or ceramic materials onto the surface. The spray is then used to enhance the surface, restoring damaged hydraulic rods, or preventing future breakdowns. Thermal spray also increases wear life.
Another coating process is the hard chrome over nickel process. Traditionally, hard chrome plating is used on hydraulic cylinder rods. However, this method has largely fallen out of favor. The main reason for hydraulic cylinder failure is corrosion of the piston rod surface. If your cylinder is exposed to rust, you may have to replace the cylinder barrel. Using a hard chrome over nickel coating can help to prevent corrosion.
Another coating process is a nickel sub-coating. Similar to a chromium trioxide-based coating, this provides corrosion resistance. It also provides a hard surface.
These coatings can be used in various hydraulics applications, including ball valves, brake pistons, and loader cylinders on compact tractors. Despite the fact that the process provides adequate corrosion resistance, some branches will not accept it, because of the nickel leaching that may occur. Unlike a chromium trioxide-based coating, a nickel sub-coating can be used on oil-based actuators, which may be prone to wear.
There are many types of hydraulic cylinders. Each type is designed for a different application. They all have different surface properties. These properties affect seal performance, leakage, and friction. If your hydraulic cylinders are not properly coated, they may rust, damage seals, and wear out prematurely.
China Best Sales Portable Concentric Ground Hydro Post Auto Wash Cylinders Scissor Gear Two in Car Pump Lift for Truck Hydraulic Hoist Krm143A   hydraulic cylinders designChina Best Sales Portable Concentric Ground Hydro Post Auto Wash Cylinders Scissor Gear Two in Car Pump Lift for Truck Hydraulic Hoist Krm143A   hydraulic cylinders design
editor by CX 2023-11-08

China best Auto Steering Gear Hydraulic Cylinder for Boat Spare Parts vacuum pump booster

Product Description

small piston double acting hydraulic lift ram cylinder

 

Product Description

 

Eaton, parker, hercules, prince, cross type double acting hydraulic cylinder are used for Trailer, Agricultural Machinery, Garbage Truck, Landing Platform etc.

Tsingshi hydraulic Customers,  MAN, JAC, VOLVO, SHACMAN, DAF, JMC,  HUNO, CIMC, SINOTRUK, TATRA,BENS,XIHU (WEST LAKE) DIS.FENG,  FOTON,etc.

1.Piston rod electroplate hard chrome;
2.lighter and easier to maintenance double acting hydraulic cylinder;
3.High quality alloy seamless steel pipe have better mechanical properties;
4.The world famous brands of seals, such as Parker, Merkel, Hallite, Kaden, etc;
5.World-class processing technology ensures stable and reliable quality.

                  

NO ITEM double acting hydraulic cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology double acting hydraulic cylinder
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa hydraulic lift cylinder
10 Temperature range -50°C to +100°C

Detailed Photos


 

Company Profile

Tsingshi hydraulic is a hydraulic telescopic cylinder for dump tipper truck company which takes up with hydraulic design, R&D, manufacturer, sell and service hydraulic products-small piston double acting hydraulic lift ram oil cylinder.

-double acting hydraulic cylinder Certification ISO9001 TS16949, etc;
-mini double acting hydraulic cylinder Export to North America, South America, Australia, South Korea, Southeast Asia, South Africa, Europe, Middle East, etc;
-ODM&OEM small double acting hydraulic cylinder according to client’s requirements;
-Professional manufacturer& supplier of Hydraulic Cylinders over 30 years;
-The micro double acting hydraulic cylinder can be used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Garbage Truck,Landing Platform etc; We can produce the follow brand hydraulic cylinder. HYVA, BINOTTO, EDBRO, PENTA, MAILHOT, CUSTOM HOIST, MUNCIE, METARIS, HYDRAULEX GLOBAL, HYCO, PARKER, COMMERCIAL HYDRAULICS, MEILLER. WTJX, XT, JX, HCIC, ZX, SZ, SJ.

 

CUSTOMERS PHOTOS

 

QUALITY GUARANTEE

 

HIGH QUALITITY GUARANTEE-double acting hydraulic cylinder
-7*24 service.
-Competitive price.
-Professional technical team.
-Perfect after-sales service system.
-ODM&OEM Hydraulic Cylinder according to customer needs.
-Strong Hydraulic Cylinder production capacity to ensure fast delivery.
-Guarantee Quality. Every process must be inspected, all products need be tested before leaving the factory.

<hydraulic cylinder Leak Test

<piston hydraulic cylinder Buffer Test

<hydraulic lift cylinder Reliability Test

<hydraulic ram cylinder Full Stroke Test

<hydraulic cylinder double acting Operation Test

<micro double acting hydraulic cylinder Pressure Tight Test

<small double acting hydraulic cylinder Load Efficiency Test
<double action hydraulic cylinder Start-up Pressure Test
<double acting hydraulic cylinder Testing the Effect of Limit

SALES AND SERVICE

 



 

PRODUCTS SERIES

 

ONE WORLD ONE LOVE

 


 

 

Certification: CE, ISO/Ts16949
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

hydraulic cylinder

What advancements in hydraulic cylinder technology have improved energy efficiency?

Advancements in hydraulic cylinder technology have led to significant improvements in energy efficiency, allowing hydraulic systems to operate more efficiently and reduce energy consumption. These advancements aim to minimize energy losses, optimize system performance, and enhance overall efficiency. Here’s a detailed explanation of some key advancements in hydraulic cylinder technology that have improved energy efficiency:

1. Efficient Hydraulic Circuit Design:

– The design of hydraulic circuits has evolved to improve energy efficiency. Advancements in circuit design techniques, such as load-sensing, pressure-compensated systems, or variable displacement pumps, help match the hydraulic power output to the actual load requirements. These designs reduce unnecessary energy consumption by adjusting the flow and pressure levels according to the system demands, rather than operating at a fixed high pressure.

2. High-Efficiency Hydraulic Fluids:

– The development of high-efficiency hydraulic fluids, such as low-viscosity or synthetic fluids, has contributed to improved energy efficiency. These fluids offer lower internal friction and reduced resistance to flow, resulting in decreased energy losses within the system. Additionally, advanced fluid additives and formulations enhance lubrication properties, reducing friction and optimizing the overall efficiency of hydraulic cylinders.

3. Advanced Sealing Technologies:

– Seal technology has advanced significantly, leading to improved energy efficiency in hydraulic cylinders. High-performance seals, such as low-friction or low-leakage seals, minimize internal leakage and friction losses. Reduced internal leakage helps maintain system pressure more effectively, resulting in less energy waste. Additionally, innovative sealing materials and designs enhance durability and extend seal life, reducing the need for frequent maintenance and replacement.

4. Electro-Hydraulic Control Systems:

– The integration of advanced electro-hydraulic control systems has greatly contributed to energy efficiency improvements. By combining electronic control with hydraulic power, these systems enable precise control over cylinder operation, optimizing energy usage. Proportional or servo valves, along with position or force feedback sensors, allow for accurate and responsive control, ensuring that hydraulic cylinders operate at the required level of performance while minimizing energy waste.

5. Energy Recovery Systems:

– Energy recovery systems, such as hydraulic accumulators, have been increasingly utilized to improve energy efficiency in hydraulic cylinder applications. Accumulators store excess energy during low-demand periods and release it when there is a peak demand, reducing the need for the hydraulic pump to provide the full power continuously. By utilizing stored energy, these systems can significantly reduce energy consumption and improve overall system efficiency.

6. Smart Monitoring and Control:

– Advancements in smart monitoring and control technologies have enabled real-time monitoring of hydraulic systems, allowing for optimized energy usage. Integrated sensors, data analytics, and control algorithms provide insights into system performance and energy consumption, enabling operators to make informed decisions and adjustments. By identifying inefficiencies or suboptimal operating conditions, energy consumption can be minimized, leading to improved energy efficiency.

7. System Integration and Optimization:

– The integration and optimization of hydraulic systems as a whole have played a significant role in improving energy efficiency. By considering the entire system layout, component sizing, and interaction between different elements, engineers can design hydraulic systems that operate in the most energy-efficient manner. Proper sizing of components, minimizing pressure drops, and reducing unnecessary piping or valve restrictions all contribute to improved energy efficiency of hydraulic cylinders.

8. Research and Development:

– Ongoing research and development efforts in the field of hydraulic cylinder technology continue to drive energy efficiency advancements. Innovations in materials, component design, system modeling, and simulation techniques help identify areas for improvement and optimize energy usage. Additionally, collaboration between industry stakeholders, research institutions, and regulatory bodies fosters the development of energy-efficient hydraulic cylinder technologies.

In summary, advancements in hydraulic cylinder technology have resulted in notable improvements in energy efficiency. Efficient hydraulic circuit designs, high-efficiency hydraulic fluids, advanced sealing technologies, electro-hydraulic control systems, energy recovery systems, smart monitoring and control, system integration and optimization, as well as ongoing research and development efforts, all contribute to reducing energy consumption and enhancing the overall energy efficiency of hydraulic cylinders. These advancements not only benefit the environment but also offer cost savings and improved performance in various hydraulic applications.

hydraulic cylinder

How do hydraulic cylinders contribute to the efficiency of agricultural tasks like plowing?

Hydraulic cylinders play a crucial role in improving the efficiency of agricultural tasks, including plowing. These cylinders provide several benefits that enhance the performance and productivity of agricultural machinery. Let’s explore how hydraulic cylinders contribute to the efficiency of plowing and other agricultural tasks:

  1. Powerful Force Generation: Hydraulic cylinders are capable of generating high forces, which is essential for tasks like plowing. The hydraulic system supplies pressurized fluid to the cylinders, converting hydraulic energy into mechanical force. This force is then utilized to drive plow blades through the soil, overcoming resistance and facilitating efficient soil penetration. The power generated by hydraulic cylinders ensures effective plowing, even in tough or compacted soil conditions.
  2. Adjustable Working Depth: Hydraulic cylinders allow for easy and precise adjustment of the plow’s working depth. By controlling the extension or retraction of the hydraulic cylinder, farmers can adjust the depth of the plow blades according to soil conditions, crop requirements, or their specific preferences. This adjustability enhances efficiency by ensuring optimal soil tillage and minimizing unnecessary energy expenditure. Farmers can adapt the plowing depth to different field areas, optimizing the use of resources and promoting uniform crop growth.
  3. Responsive Control: Hydraulic systems offer highly responsive control, enabling farmers to make quick adjustments during plowing operations. Hydraulic cylinders respond rapidly to changes in hydraulic pressure and valve settings, allowing for immediate modifications in the plow’s position, depth, or angle. This responsiveness enhances efficiency by facilitating on-the-go adjustments based on soil variations, obstacles, or changing field conditions. Farmers can maintain precise control over the plow’s performance, ensuring effective soil tillage and minimizing the risk of crop damage.
  4. Implement Versatility: Hydraulic cylinders enable the attachment of various implements to agricultural machinery, expanding their functionality and versatility. In the context of plowing, hydraulic cylinders allow for the attachment and detachment of plow blades or other tillage implements. This versatility enables farmers to adapt their equipment to different soil types, field sizes, or specific plowing requirements. By using hydraulic cylinders, farmers can easily switch between different implements, optimizing their equipment for specific tasks and maximizing efficiency.
  5. Efficient Time Management: Hydraulic cylinders contribute to time efficiency in agricultural tasks like plowing. With hydraulic systems, farmers can operate plows at higher speeds while maintaining control and precision. The responsive nature of hydraulic cylinders allows for efficient turning, maneuvering, and repositioning of plows, minimizing downtime and optimizing field coverage. This time efficiency translates into increased productivity and reduced overall operational costs. Farmers can accomplish plowing tasks more quickly, allowing them to cover larger field areas in less time.

In summary, hydraulic cylinders significantly contribute to the efficiency of agricultural tasks like plowing. Through powerful force generation, adjustable working depth, responsive control, implement versatility, and efficient time management, hydraulic systems equipped with cylinders enhance the performance and productivity of agricultural machinery. These contributions allow farmers to accomplish plowing tasks more effectively, optimize field operations, and achieve improved overall efficiency in their agricultural practices.

hydraulic cylinder

How do hydraulic cylinders accommodate variations in stroke length and force requirements?

Hydraulic cylinders are designed to accommodate variations in stroke length and force requirements, providing flexibility and adaptability for different applications. They can be tailored to meet specific needs by considering factors such as piston diameter, rod diameter, hydraulic pressure, and cylinder design. Here’s a detailed explanation of how hydraulic cylinders accommodate variations in stroke length and force requirements:

1. Cylinder Size and Design:

– Hydraulic cylinders come in various sizes and designs to accommodate different stroke lengths and force requirements. The cylinder’s diameter, piston area, and rod diameter are key factors that determine the force output. Larger cylinder diameters and piston areas can generate greater force, while smaller diameters are suitable for applications requiring lower force. By selecting the appropriate cylinder size and design, stroke lengths and force requirements can be effectively accommodated.

2. Piston and Rod Configurations:

– Hydraulic cylinders can be designed with different piston and rod configurations to accommodate variations in stroke length. Single-acting cylinders have a single piston and can provide a stroke in one direction. Double-acting cylinders have a piston on both sides, allowing for strokes in both directions. Telescopic cylinders consist of multiple stages that can extend and retract, providing a longer stroke length compared to standard cylinders. By selecting the appropriate piston and rod configuration, the desired stroke length can be achieved.

3. Hydraulic Pressure and Flow:

– The hydraulic pressure and flow rate supplied to the cylinder play a crucial role in accommodating variations in force requirements. Increasing the hydraulic pressure increases the force output of the cylinder, enabling it to handle higher force requirements. By adjusting the pressure and flow rate through hydraulic valves and pumps, the force output can be controlled and matched to the specific requirements of the application.

4. Customization and Tailoring:

– Hydraulic cylinders can be customized and tailored to meet specific stroke length and force requirements. Manufacturers offer a wide range of cylinder sizes, stroke lengths, and force capacities to choose from. Additionally, custom-designed cylinders can be manufactured to suit unique applications with specific stroke length and force demands. By working closely with hydraulic cylinder manufacturers, it is possible to obtain cylinders that precisely match the required stroke length and force requirements.

5. Multiple Cylinders and Synchronization:

– In applications that require high force or longer stroke lengths, multiple hydraulic cylinders can be used in combination. By synchronizing the movement of multiple cylinders through the hydraulic system, the stroke length and force output can be effectively increased. Synchronization can be achieved using mechanical linkages, electronic controls, or hydraulic circuitry, ensuring coordinated movement and force distribution across the cylinders.

6. Load-Sensing and Pressure Control:

– Hydraulic systems can incorporate load-sensing and pressure control mechanisms to accommodate variations in force requirements. Load-sensing systems monitor the load demand and adjust the hydraulic pressure accordingly, ensuring that the cylinder delivers the required force without exerting excessive force. Pressure control valves regulate the pressure within the hydraulic system, allowing for precise control and adjustment of the force output based on the application’s needs.

7. Safety Considerations:

– When accommodating variations in stroke length and force requirements, it is essential to consider safety factors. Hydraulic cylinders should be selected and designed with an appropriate safety margin to handle unexpected loads or variations in operating conditions. Safety mechanisms such as overload protection valves and pressure relief valves can be incorporated to prevent damage or failure in situations where the force limits are exceeded.

By considering factors such as cylinder size and design, piston and rod configurations, hydraulic pressure and flow, customization options, synchronization, load-sensing, pressure control, and safety considerations, hydraulic cylinders can effectively accommodate variations in stroke length and force requirements. This flexibility allows hydraulic cylinders to be tailored to meet the specific demands of a wide range of applications, ensuring optimal performance and efficiency.

China best Auto Steering Gear Hydraulic Cylinder for Boat Spare Parts   vacuum pump booster	China best Auto Steering Gear Hydraulic Cylinder for Boat Spare Parts   vacuum pump booster
editor by CX 2023-10-22