Tag Archives: hydraulic parker

China Parker Interchangeable Hydraulic Hoist Cylinder for Dump Truck surplus center hydraulic cylinders

Solution Description

Merchandise Photo

Firm Introduction

Zhongxin Machinery focus in the generation and R&D of Dump Truck&Trailer Telescopic Hydraulic Cylinder,
Dump Truck Hydraulic Technique,Agricultural Machinery Hydraulic Cylinder, Garbage Truck Hydraulic Cylinder,
Tipping System Hydraulic Cylinder,Snow Plow Hydraulic Cylinder and so on.

Above the several years improvement,our merchandise have been exported to
The usa,Australia,Russia,Canada,Mexico,Guatemala,Colombia,Netherlands and so on
and have been widely praised by the clients from property and overseas.

We are committed to offering consumers with substantial high quality and affordable price tag items.
All ZhongXin products are created,engineered and made by highly competent and skilled engineers,
All the goods do QC 3 instances prior to shipping to make positive the top quality.

Our Equipment

Item Introduction

Product Variety 1st stage diameter(inch) Extensions Stroke(inch)
S95DC-265 nine.375″ 5 265″
S95DC-220 nine.375″ 5 220″
S85DC-265 eight.125″ five 265″
S85DC-250 eight.125″ five 250″
S85DC-235 8.125″ 5 235″
S85DC-220 eight.125″ five 220″
S85DC-one hundred ninety eight.one hundred twenty five” 5 one hundred ninety”
S74DC-a hundred and eighty 7″ 4 one hundred eighty”
S74DC-156 7″ 4 156″
S74DC-a hundred thirty five seven” 4 one hundred thirty five”
S73DC-one hundred twenty five 7″ 3 125″
S73DC-one hundred twenty seven” three one hundred twenty”
S64DC-156 6″ four 156″
S64DC-135 6″ 4 135″
S63DC-a hundred and forty 6″ 3 one hundred forty”
S63DC-132 6″ three 132″
S63DC-126 6″ 3 126″
S63DC-a hundred and twenty six” 3 one hundred twenty”
S63DC-108 6″ 3 108″
S53DC-126 5″ three 126″
S53DC-eighty four five” 3 eighty four”

Hydraulic Cylinder Software

Deal&Shipping 

Consumers

FAQ

A. Compared with CZPT cylinder, what are your cylinder rewards?
     1. Rod are chrome plated.
     2. Tubes are quenched and tempered.
     3.Tube internal gap goes by way of deep hole uninteresting equipment processing. Floor roughness is .4Ra 
        and round degree is .571.
     4. Good good quality yet reduced cost.
 
B: Are you a manufacturer or a trading company?
     Manufacturer, we are the leader company of hydraulic business in China with 14 years’ encounter and technology accumulation.With strong specialized team we could solve any annoyance of you.

C: How can I get a booklet and get a cylinder from you?
     Just depart me a message or email or get in touch with me right, allow me know you are fascinating in our products. I will chat with you for the particulars quickly!

    1. Please suggestions the drawing with technological prerequisite.
    2. Remember to advice the product No. soon after you verify our booklet.
    3. Remember to tips the tipping capability, amount of phases, closed length, mounting kind and measurement.
    4. Remember to also aid guidance the portions, this is very important.
 
D: Do your merchandise occur with a warranty?
    Of course, we have 14 months warranty. In this 12 months, if the high quality problem we will free fix for you.
 
E: What about the quality comments of your products?
    We have by no means received even as soon as high quality criticism for a lot of years of intercontinental organization. 
 
F: Can you support me to install or suggest what sort of hydraulic cylinder or electricity pack must I use for specific equipment?
    Sure, we have 6 experienced engineers who are always prepared to help you. If you do not know what type of hydraulic cylinders need to be utilized in your device, you should just speak to us, our engineers will design the specific items match your want.
 
G: What is the shipping and delivery time?
     Within 15 times for samples.
     25-thirty times for bulk creation, which is count on quality, creation procedure and so on.
 
H: What is your principal payment term?
     T/T, L/C, both is obtainable.

 

US $420-980
/ Piece
|
2 Pieces

(Min. Order)

###

Certification: CE, ISO9001
Pressure: High Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Number 1st stage diameter(inch) Extensions Stroke(inch)
S95DC-265 9.375" 5 265"
S95DC-220 9.375" 5 220"
S85DC-265 8.125" 5 265"
S85DC-250 8.125" 5 250"
S85DC-235 8.125" 5 235"
S85DC-220 8.125" 5 220"
S85DC-190 8.125" 5 190"
S74DC-180 7" 4 180"
S74DC-156 7" 4 156"
S74DC-135 7" 4 135"
S73DC-125 7" 3 125"
S73DC-120 7" 3 120"
S64DC-156 6" 4 156"
S64DC-135 6" 4 135"
S63DC-140 6" 3 140"
S63DC-132 6" 3 132"
S63DC-126 6" 3 126"
S63DC-120 6" 3 120"
S63DC-108 6" 3 108"
S53DC-126 5" 3 126"
S53DC-84 5" 3 84"
US $420-980
/ Piece
|
2 Pieces

(Min. Order)

###

Certification: CE, ISO9001
Pressure: High Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Number 1st stage diameter(inch) Extensions Stroke(inch)
S95DC-265 9.375" 5 265"
S95DC-220 9.375" 5 220"
S85DC-265 8.125" 5 265"
S85DC-250 8.125" 5 250"
S85DC-235 8.125" 5 235"
S85DC-220 8.125" 5 220"
S85DC-190 8.125" 5 190"
S74DC-180 7" 4 180"
S74DC-156 7" 4 156"
S74DC-135 7" 4 135"
S73DC-125 7" 3 125"
S73DC-120 7" 3 120"
S64DC-156 6" 4 156"
S64DC-135 6" 4 135"
S63DC-140 6" 3 140"
S63DC-132 6" 3 132"
S63DC-126 6" 3 126"
S63DC-120 6" 3 120"
S63DC-108 6" 3 108"
S53DC-126 5" 3 126"
S53DC-84 5" 3 84"

Types of Hydraulic Cylinders

Besides being used for construction and manufacturing machinery, hydraulic cylinders are also used in elevators and vehicles. In fact, the use of hydraulic cylinders has become increasingly common in the recent years.hydraulic cylinders

Single-acting cylinders

Unlike double-acting hydraulic cylinders, single-acting hydraulic cylinders are less complex and are easy to install and maintain. They are also more efficient and compact. They can also be used in applications that require only one direction of motion. They are also useful in applications where space is limited, such as in a small industrial or commercial setup.
Single-acting hydraulic cylinders are usually used for simple lifting and positioning jobs. They also are useful for clamping and diagnostic instrumentation. They are cheap to manufacture and are very easy to install. They are also easy to maintain, which makes them ideal for rugged equipment.
Single-acting hydraulic cylinders are used in a variety of applications, including pumps, internal combustion engines, diagnostic instrumentation, and positioning. They have advantages and disadvantages, but they are an ideal solution for many applications.
Single-acting cylinders typically have one port, and a spring is used to force the piston into its position. The spring then retracts the piston into its previous position. This process can become irregular over time. The spring also requires venting, and can allow foreign particles to enter the cylinder.
A single-acting cylinder can also be retracted by gravity. This is called a spring return cylinder. Some single-acting cylinders have a second piston to forcefully retract the piston into its original position. This can be a problematic operation. The result can be uneven strokes.
Generally, single-acting hydraulic cylinders are not as powerful as double-acting hydraulic cylinders. They require less air, which can boost efficiency. However, their size can be a drawback. They are also susceptible to particles entering the cylinder, which can cause slow performance decline and malfunctions.
Single-acting hydraulic cylinders are ideal for applications with space constraints. They are also useful for compact operations and light assembly. They also save on piping costs. They are suitable for industrial applications such as tow trucks and bulldozers. They are also used in commercial and light industrial applications.
Single-acting hydraulic cylinders are simple to use, but may not provide the same power as double-acting cylinders. They may be less durable, and can also be subject to wear and tear, particularly in the area of retraction.

Welded body cylinders

Compared to other types of cylinders, welded body hydraulic cylinders are more compact in size and less prone to wear and tear. This type of cylinder is commonly used in construction and heavy equipment applications. These cylinders are designed for rugged environments. They are typically used in oil rigs, large off-road vehicles, and cranes.
They have less sharp corners and are easier to customize than other types of cylinders. They are also less expensive to manufacture. In addition, they can be manufactured in a variety of different materials. They are available in different lengths and thicknesses. They are also able to be fabricated using CNC turret punching and MIG welding methods. They are also available in different configurations.
They also have heavy-duty piston seals that provide consistent performance in heavy-load applications. They are also able to be used in applications with large temperature swings. They are also resistant to corrosion.
Welded body hydraulic cylinders are commonly used in mobile machinery applications. This makes them highly versatile and able to fit into tight spaces. They are also used in material handling and lift truck applications. These hydraulic cylinders are also more durable than tie rod type cylinders, which means they are less likely to fail.
They are also available in a variety of different metals. They are also available in rolled or pressed formed shapes. They can be used in press braking, shearing, and rolling structural steel. They are also available in oil and gas applications. They are also available in a variety of sizes from 3 to 169 inches in diameter.
These cylinders are designed to be durable and versatile. They are also designed to accommodate multi-stage adjustable cylinders. They are also able to accommodate custom provisions and are designed to fit into tighter machinery designs. They are also able to be manufactured in a variety of different materials, including high-strength low-alloy steel, 300 and 400 grade stainless steel, and Hastelloy(r) alloys.
They also have a smooth exterior surface. This means there are fewer sharp corners and places where moisture and dirt can settle. The cylinders also have a high level of precision tolerance, ensuring that they can handle high pressures without the metal flexing or sagging.hydraulic cylinders

Tandem cylinders

Often used in heavy industrial applications, tandem hydraulic cylinders are an important part of maintaining the functionality of heavy industrial machinery. Unlike a single cylinder, a tandem cylinder produces twice as much force. They are widely used in barges, cranes, elevated work platforms, fork lift trucks, and a number of other industrial applications.
Hydraulic cylinders are a form of power transfer system that operates on the same principle as pneumatic systems. This allows for infinitely variable force. They are also designed with locking safety mechanisms to prevent accidental damage. They are available in various materials for different applications.
Hydraulic cylinders work by using a piston rod that is thrust through an open gland at one end of the cylinder. This piston rod is then retracted when pressurised fluid bursts out of the cylinder. Its position is controlled by a seal and steel ring. These materials have been used in a variety of industries such as forestry, construction technology, and aircraft development.
Tandem hydraulic cylinders are also used in agricultural equipment such as crop sprayers. They are also used in heavy industrial machinery such as mining equipment.
These cylinders are manufactured by a number of companies including Eaton Corporation, Bosch Rexroth AG, and Caterpillar Inc. In addition, they can be customized to fit your specifications. They are also available in custom air cylinders with a minimum base material of 50,000 psi and a yield of 100,000.
There are a number of types of tandem cylinders. They can be differentiated into non-differential, double rod, balanced, cushioned, and spring return.
Cylinders in tandem typically have two chambers that are the same size. The first chamber is connected to the second cylinder by a port. The second chamber is operated by oil that is ejected from the first cylinder. This ensures that the next steering movements do not occur before the primary piston has completed its stroke.
Tandem hydraulic cylinders are easy to install and are designed to be extremely versatile. They are also extremely reliable. Pacoma is a leading provider of double acting cylinders that stand up to intense pressures. Its cylinders are designed with a solid construction and high-quality components.hydraulic cylinders

Cushioned cylinders

Typically, cushioned hydraulic cylinders are used in manufacturing equipment. They are used to reduce shock waves in the hydraulic circuit, to improve productivity and to reduce maintenance costs. They are also widely used in automobiles.
These cylinders feature a limiting device on the piston head. This device reduces excess load at the end of the outward stroke, which decreases the piston’s speed and vibration. This reduces the total working cycle time and increases productivity.
Cushioned hydraulic cylinders are made using a variety of techniques. Some are used to reduce shock waves and others are used to limit impact forces. However, these techniques do not allow for precise control over the amount of cushioning. This can lead to improper adjustment and reduced performance.
These techniques may require regular maintenance. Cushioning readjustment is often required when changing operating conditions. This can have a significant impact on a machine’s performance. For this reason, it is important to have regular preventive maintenance.
The cushioning of a cylinder is controlled through a series of valves. Each valve is located at a different point on the cylinder. This allows for an optimal cylinder adjustment that reduces oscillations and improves total working cycle time. It can also help to save energy and maintain a quiet working environment.
There are two basic types of cushioned hydraulic cylinders. The first is a spear-type design. This type of cushioning includes a sleeve or spear that enters and exits a concentric pocket. These cylinders require space in the end cap.
Another type of cushioned hydraulic cylinder is a welded cylinder. This cylinder has a piston rod ring that forms an annular restriction when the piston rod is axially moved into engagement with land. The area of the annular restriction increases as the piston moves closer to the head of the cylinder. When the piston moves in the opposite direction, the ring bypasses the annular restriction and the hydraulic fluid enters the cylinder.
When designing a hydraulic cylinder, it is important to consider the amount of cylinder pressure. This is a critical factor for selecting seals and tube wall thickness.
China Parker Interchangeable Hydraulic Hoist Cylinder for Dump Truck     surplus center hydraulic cylindersChina Parker Interchangeable Hydraulic Hoist Cylinder for Dump Truck     surplus center hydraulic cylinders
editor by czh 2022-12-30

China Parker Packer Blade Ejector Push out Double Acting Telescopic Hydraulic Cylinder for Heil Front Loader Garbage Truck and Waste Rubbish Compactor Refuse Bodies hydraulic cylinders at tractor supply

Merchandise Description

double acting telescopic hydraulic cylinder for rubbish truck and compactor

 

Item Description

 Tsingshi hydraulic Buyers,  MAN, JAC, VOLVO, SHACMAN, DAF, JMC,  HUNO, CIMC, SINOTRUK, TATRA,BENS,XIHU (WEST LAKE) DIS.FENG,  FOTON,and so forth.

1.Each and every phase electroplate hard chrome
two.lighter and less complicated to upkeep double acting telescopic hydraulic cylinder
3.High top quality alloy seamless metal pipe have far better mechanical homes
four.The globe famous manufacturers of seals, these kinds of as HALLITE, PARKER,and many others
five.World-class processing technology ensures steady and dependable good quality.

                  

NO Item double performing telescopic hydraulic cylinder Knowledge
1 Materials Carbon Steel, Alloy Metal, 27SiMn,forty five#,20#,etc
2 Honed tube forty-300mm, Warmth remedy, honing, rolling
3 Honed tube thirty-280mm, plated nickel or tough Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, and so on
5 Coating Sandblasting, primer paint, center paint, complete paint,
Color can paint in accordance to client calls for.
6 Technologies Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT

seven Mounting sort Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, Price, FSE,TPIN
eight Working medium Hydraulic Oil
nine Doing work force sixteen-20Mpa double action Hydraulic Cylinder
10 Temperature variety -50°C to +100°C

Detailed Photos


 

Firm Profile

Tsingshi hydraulic is a hydraulic telescopic cylinder for dump tipper truck company which takes up with hydraulic style, R&D, producer, market and support hydraulic merchandise-double acting telescopic hydraulic cylinder.

-Hydraulic Cylinders Certification ISO9001 TS16949, and so on
-Double performing telescopic hydraulic cylinder Export to North The us, South America, Australia, South Korea, Southeast Asia, South Africa, Europe, Center East, and so forth
-ODM&OEM double performing telescopic hydraulic cylinder in accordance to client’s demands
-Expert producer& supplier of Hydraulic Cylinders over 30 years
-The Hydraulic telescopic Cylinders can be utilised for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Rubbish Truck,Landing Platform and many others We can produce the comply with manufacturer hydraulic cylinder. HYVA, BINOTTO, EDBRO, PENTA, MAILHOT, Custom made HOIST, MUNCIE, METARIS, HYDRAULEX World-wide, HYCO, PARKER, Industrial HYDRAULICS, MEILLER. WTJX, XT, JX, HCIC, ZX, SZ, SJ.

 

Clients Photos

 

Top quality Assure

 

Substantial QUALITITY Assure-double acting telescopic hydraulic cylinder
-7*24 services.
-Aggressive price.
-Professional technological staff.
-Perfect right after-sales provider technique.
-ODM&OEM according to customer wants.
-Powerful manufacturing capability to ensure quick shipping and delivery.
-Promise Good quality. Each and every procedure need to be inspected, all items need to have be tested just before leaving the factory.

<Hydraulic Cylinder Leak Test

<Hydraulic Cylinder Buffer Test

<Hydraulic Cylinder Reliability Test

<Hydraulic Cylinder Full Stroke Test

<Hydraulic Cylinder Trial Operation Test

<Hydraulic Cylinder Pressure Tight Test

<Hydraulic Cylinder Load Efficiency Test
<Hydraulic Cylinder Start-up Pressure Test
<double acting telescopic hydraulic cylinder Testing the Effect of Limit

Revenue AND Service

 



 

Merchandise Collection

 

One Entire world One Love

 


 

 

US $400-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Certification: CE, ISO/Ts16949
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

NO ITEM double acting telescopic hydraulic cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa double action Hydraulic Cylinder
10 Temperature range -50°C to +100°C
US $400-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Certification: CE, ISO/Ts16949
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

NO ITEM double acting telescopic hydraulic cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa double action Hydraulic Cylinder
10 Temperature range -50°C to +100°C

Buying Guide For Hydraulic Cylinders

Whether you are looking to replace a broken hydraulic cylinder or are interested in learning more about them, you will be glad to know that there are many options to choose from. The materials used to build cylinders, their stroke lengths and seals are just a few things to consider.hydraulic cylinders

‘Parallel’ vs ‘Series’ cylinders

Choosing a hydraulic cylinder that is a good fit for your application is important. In general, there are two types of hydraulic cylinders: single-rod and tandem. In tandem cylinders, the two cylinders move in unison. This is the best way to transfer energy.
A welded body hydraulic cylinder is the most common type of hydraulic cylinder. It is used in construction equipment and other heavy industries. The cylinder body is welded in place and the base end is welded to it. It is normally rated for higher pressures.
A welded body hydraulic cylinder also has a built-in directional control valve. This valve works on both the inlet and the work ports. The oil from the pump goes through the control valves in series. This type of control valve usually has a small orifice drilled into it. It creates a pressure differential that forces the cylinders to work in unison.
Another type of hydraulic cylinder is the tie rod cylinder. It has a barrel and piston rod that is mounted on the bottom of the barrel. The piston rod operates both inside the barrel and out of the barrel.
There are many other types of hydraulic cylinders. Some of the more common include the plunger type, the tie rod type, and the single rod type. There are also many other types of cylinders, but they all have one thing in common: they use hydraulic fluid to power the piston.
The best hydraulic cylinder is one that can lift its weight. It is also important to select the best size for your application. The size of the cylinder depends on the load you intend to lift. If the loads are too large, you may have a difficult time maintaining synchronization. However, if the loads are not too heavy, you may be able to achieve the desired performance.
The hydraulic series relationship is a good place to start. If the loads are evenly distributed, the cylinders will work in unison. The flow control valves are a good way to keep cylinders in sync. A pilot-operated check valve is a good choice, as it will stop oil transfer when the mid-stroke is stopped.

Stroke lengths

Regardless of whether you’re buying a hydraulic cylinder for a small engine or a large excavator, the following guide can help you determine the optimal stroke length. The length is measured in inches. This is a standard measurement and is easy to obtain. The stroke is the distance covered by the rod and piston between the fully extended height and the fully retracted height of the cylinder.
The cylinder’s stroke can be measured in one of three ways. It can be based on the diameter of the rod, the diameter of the bore, or the difference between the maximum extended length and the minimum extended length. The cylinder’s stroke can range from a fraction of an inch to several feet. The stroke is a good indicator of the length of pull that can be exerted from the piston.
The largest part of the hydraulic cylinder is the rod. It is a round chrome-plated steel bar that performs the reciprocating motion. The diameter of the rod ranges from a few inches to twenty inches. It is referred to as the shiny part of the cylinder.
The retracted length is the distance between the centers of the mounting pins when the cylinder is closed. It is a standard measurement and can be measured with a tape measure. The retracted length is important for the proper functioning of the cylinder.
Using the retracted length, calculate the cylinder’s stroke. The stroke is the distance covered by the piston and rod between the fully extended height and the fully shortened height of the cylinder. This is the best indication of the length of pull that can be exerted.
The stroke is also the best indication of the length of lift that can be exerted from the piston. It can be measured using a caliper. The caliper can be used to measure the diameter of the rod and the thickness of the piston. It can also be used to calculate the difference between the maximum extended length and the maximum retracted length. This gives you the maximum length in the retracted position.hydraulic cylinders

Materials used

Various materials are used in the manufacture of hydraulic cylinders. The materials have to be tough and durable enough to withstand the pressures of the hydraulic fluid. Besides, the materials must also be compatible with the hydraulic fluid. If the materials are not strong enough, the cylinder may not fully stroke.
Hydraulic cylinders are made of steel and other durable materials. They can be used in a variety of applications. They are used in manufacturing, construction, mining, and industrial technology. They can also be found in the aviation and aircraft industry. They have also been used in forestry.
Most hydraulic cylinders are made of 1018/1020 cold rolled steel. They are usually coated with Hard Chrome Plating to prevent corrosion. A variety of coatings are also available for cylinders.
In hydraulic systems, the fluid used is usually mineral oil or water glycol. Some cylinders also use fire resistant water glycol-based fluid. However, this type of fluid may still cause lubrication problems.
Another material used in hydraulic cylinders is stainless steel. These are generally inexpensive and easy to find. They are also environmentally friendly and work well with fuels and solvents. They are also durable in acidic environments.
Composite materials have also been used in the aerospace industry for years. They have also been used in high pressure vessels for CNG storage. They have a higher strength to weight ratio than steel. They have also been used in the automotive industry for many years.
The seal, piston, and steel ring work together to provide stability and control. They can also help ensure that the cylinder remains in place. These materials are also used for double-acting cylinders, which have ports on either side of the piston rod. The pressure on both sides of the piston rod helps control the movement of the cylinder.
Another type of cylinder is the tie rod style. This type of cylinder uses high-strength threaded steel tie rods to secure the cylinder. The tie rods stretch at high pressures, which allows the cylinder to function efficiently. The cylinders are commonly used in industrial factory applications.hydraulic cylinders

Seals

Choosing the right seals for hydraulic cylinders is crucial to the functioning of a hydraulic system. These seals are designed to protect the internal components of the cylinder from contamination and leakage. They are used in various industries, including construction, agriculture and industrial plants.
Hydraulic cylinder seals come in a variety of designs. They are used in both static and dynamic applications. They are also subjected to high temperatures and high pressures. Therefore, they must be made of the right material to withstand the tough conditions. The seals must also be able to resist the change of hydraulic fluid.
Hydraulic cylinder seals are made from materials such as PTFE, polyurethane and rubber. These materials provide a durable seal for cylinders. They are also resistant to abrasion and tearing.
Seals for hydraulic cylinders are categorized into static and dynamic designs. Static seals are typically found in round cross-sections. They are used between the piston and the cylinder pipe. They are also known as gland seals. These seals are usually attached to the cylinder pipe with a threaded connection. The gland seal usually includes a wiper ring that keeps the interior of the cylinder clean and free from contamination.
Hydraulic cylinder seals also must be able to withstand high temperatures and high pressures. They are used in a variety of applications, including logging equipment. The main sealing material for hydraulic cylinders is polyurethane.
Seals for hydraulic cylinders can be made from thermoplastic or elastomeric polymers. These materials combine the strength of plastic with the flexibility of rubber. Thermoplastic elastomers also have better elasticity, enabling them to maintain constant pressure for longer periods of time.
In dynamic sealing systems, low friction coefficients are a basic requirement. This is due to the need for maximum tightness in dynamic conditions. Seal materials must also be capable of forming a tight seal against irregular metal surfaces.
The seal material must also be able to expand rapidly to follow dimensional changes. This is important for high-pressure cylinders, as they may undergo deformation. It is also important to use a material that can withstand corrosion.
China Parker Packer Blade Ejector Push out Double Acting Telescopic Hydraulic Cylinder for Heil Front Loader Garbage Truck and Waste Rubbish Compactor Refuse Bodies     hydraulic cylinders at tractor supplyChina Parker Packer Blade Ejector Push out Double Acting Telescopic Hydraulic Cylinder for Heil Front Loader Garbage Truck and Waste Rubbish Compactor Refuse Bodies     hydraulic cylinders at tractor supply
editor by czh 2022-12-22

China Hyva Parker Custom Hoist Binotto Penta Edbro Type Multi Stage Section Big Rod Telescopic Long Stroke Hydraulic Cylinder for Lift Dump Truck Tipper Semi Trailer hydraulic cylinder bore size chart

Product Description

telescopic long stroke hydraulic cylinder lift dump truck tipper trailer

 

Product Description

 

Hyva & CZPT & Custom hoist & Xihu (West Lake) Dis.r type hydraulic telescopic Cylinders are used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Garbage Truck, Landing Platform etc.

Tsingshi hydraulic Customers,  MAN, JAC, VOLVO, SHACMAN, DAF, JMC,  HUNO, CIMC, SINOTRUK, TATRA,BENS,XIHU (WEST LAKE) DIS.FENG,  FOTON,etc.

1.Hydraulic Cylinder Each stage electroplate hard chrome;
2.lighter and easier to maintenance Hydraulic Cylinder;
3.High quality alloy seamless steel pipe have better mechanical properties;
4.The world famous brands of seals, such as HALLITE, PARKER,etc;
5.World-class processing technology ensures stable and reliable quality.

                  

NO ITEM Hydraulic Cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT

7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa Hydraulic Cylinder
10 Temperature range -50°C to +100°C

Detailed Photos


 

Company Profile

Tsingshi hydraulic is a hydraulic telescopic cylinder for dump tipper truck company which takes up with hydraulic design, R&D, manufacturer, sell and service hydraulic products-telescopic hydraulic cylinder for dump truck and tipper trailer.

-Hydraulic Cylinders Certification ISO9001 TS16949, etc;
-Telescopic Hydraulic Cylinder Export to North America, South America, Australia, South Korea, Southeast Asia, South Africa, Europe, Middle East, etc;
-ODM&OEM Hydraulic Telescopic Cylinder according to client’s requirements;
-Professional manufacturer& supplier of Hydraulic Cylinders over 30 years;
-The Hydraulic telescopic Cylinders can be used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Garbage Truck,Landing Platform etc; We can produce the follow brand hydraulic cylinder. HYVA, BINOTTO, EDBRO, PENTA, MAILHOT, CUSTOM HOIST, MUNCIE, METARIS, HYDRAULEX GLOBAL, HYCO, PARKER, COMMERCIAL HYDRAULICS, MEILLER. WTJX, XT, JX, HCIC, ZX, SZ, SJ.

 

CUSTOMERS PHOTOS

 

QUALITY GUARANTEE

 

HIGH QUALITITY GUARANTEE-Hydraulic Cylinder
-7*24 service.
-Competitive price.
-Professional technical team.
-Perfect after-sales service system.
-ODM&OEM according to customer needs.
-Strong production capacity to ensure fast delivery.
-Guarantee Quality. Every process must be inspected, all products need be tested before leaving the factory.

<Hydraulic Cylinder Leak Test

<Telescopic Hydraulic Cylinder Buffer Test

<Hydraulic Telescopic Cylinder Reliability Test

<Dump truck Hydraulic Cylinder Full Stroke Test

<Dump trailer Hydraulic Cylinder Trial Operation Test

<Tipper truck Cylinder Pressure Tight Test

<Dump truck telescopic Hydraulic Cylinder Load Efficiency Test
<Dump trailer telescopic Hydraulic Cylinder Start-up Pressure Test
<Long stroke Hydraulic Cylinder Testing the Effect of Limit

SALES AND SERVICE

 

ONE WORLD ONE LOVE

 


 

 

US $300-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Certification: CE, ISO/Ts16949
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

NO ITEM Hydraulic Cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa Hydraulic Cylinder
10 Temperature range -50°C to +100°C
US $300-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Certification: CE, ISO/Ts16949
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

NO ITEM Hydraulic Cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa Hydraulic Cylinder
10 Temperature range -50°C to +100°C

Different Types of Hydraulic Cylinders

Generally, hydraulic cylinders are used in manufacturing machinery, construction equipment, and civil engineering. They are also used in elevators, and to provide unidirectional force.hydraulic cylinders

Single-acting vs double-acting

Whether you are deciding on single-acting vs double-acting hydraulic cylinders for your application, it is important to understand the differences between the two so that you can make an informed decision. There are a number of advantages and disadvantages to both types, so choosing the right one for your application can be difficult.
Single-acting cylinders use compressed air to force the piston rod to extend, while double-acting cylinders use hydraulic fluid to actuate the piston rod. The piston rod is then returned to its original position after the pressure is released.
Double-acting cylinders have two ports that connect to the piston rod. Hydraulic fluid is pumped into the first port to extend the piston rod, while the second port provides pressure to the piston rod to retract it. The fluid exits through the other port. The cylinder’s pressure can be increased by increasing the fluid flow through the cylinder. This can also increase the speed of the cylinder.
Single-acting cylinders are cheaper to manufacture and install than double-acting cylinders. They are also easier to maintain. They also use fewer seals and valves than double-acting cylinders. However, they have a limited amount of control during operation. They also require a control system consisting of position valves. They are commonly used in reciprocating engines, hydraulic rams, and pumps. They are also useful for lifting equipment, lift shafts, and steering mechanisms.
Single-acting cylinders also have a certain rest state. If the power goes out, the cylinder will return to its resting position. However, if the springs wear out or the internal components break, the end of the stroke may be uncertain. This can be dangerous during power outages.
Unlike single-acting cylinders, double-acting cylinders provide stronger control and flexibility. They can be used in virtually any machine application. They are particularly useful for robotics, medical, and industrial tasks. They also provide more design options. They are also more energy efficient, but have a higher cost. They are also often more durable than single-acting cylinders.
Double-acting cylinders are available in a variety of sizes and designs. They are often used to control steering in excavators and TLBs. They are also used to move merchandise off conveyor belts. They are available in lightweight and high-tonnage models. They can also be used to control booms on TLBs. They have ISO standards compliance. They can also be converted to single-acting cylinders, if desired.
Single-acting cylinders are generally cheaper to manufacture and install, but they do not offer the same level of control as double-acting cylinders. They are also easier to repair, so they are often used in fixed applications. They are also available in a variety of sizes, including low-height models. They are also available in a variety or styles, including telescopic hydraulic cylinders. They are also available in many different applications, including lifting equipment, dump trailers, and platform truck trailers.hydraulic cylinders

Stainless steel vs steel

Stainless steel and steel hydraulic cylinders are both durable materials that offer many benefits to users. These hydraulic cylinders are used in a number of different industries, including food and beverage processing. The food processing industry has very strict guidelines for cleaning equipment, so stainless steel hydraulic cylinders are preferred.
Stainless steel is a material that is non-porous, which means that it prevents bacteria from settling on the surface of the cylinder. This is important because food processing equipment needs to be clean to ensure the safety of consumers. A stainless steel cylinder is also a good choice for areas that are susceptible to corrosive chemicals.
Another advantage of stainless steel is the tensile strength of the metal. This makes it perfect for hydraulic applications that produce high temperatures. It also has excellent heat resistance. While the material can easily withstand the heat, it may not be as durable in humid or wet environments. In these conditions, nitriding is used to increase the surface hardness of the metal. In addition, special construction may be used to reduce oxidation.
While stainless steel hydraulic cylinders are used in many industries, the food processing industry is among the most common. Food processing equipment is heavily used, and stainless steel ensures that components will last. This is particularly true in environments that frequently require washing.
One of the best features of stainless steel is its resistance to corrosion. Its alloy composition contains at least 10% chromium, which helps create a thin layer of chromium oxide. This oxide layer protects the metal from rusting, and it also improves the self-repairing qualities of the material. The alloy also contains molybdenum, which creates a non-porous surface. This is important in food processing equipment because it prevents food particles from adhering to the surface. It also helps eliminate downtime due to contamination.
Stainless steel hydraulic cylinders are also durable, and they can withstand frequent cleaning. They are also used in equipment that is washdown-ready. The cylinders’ surfaces may be polished to achieve a satin finish, which is noticeable by fine, uniform grit lines across the stainless steel. The surface may also be coated in a variety of paints. This helps prevent bacteria from settling on the surface of the metal, and it also prevents food particles from sticking to the cylinder.
Another benefit of stainless steel hydraulic cylinders is that they can be used in environments that are highly contaminated with corrosive chemicals. They are especially suited for offshore oil rigs, where they are exposed to aqueous corrosion. They are also favored for use in the metals industry, as well as in pulp and paper mills. They are also used in a number of other applications, including cold press juicers and chocolate molding machines.
Stainless steel hydraulic cylinders also tend to have a streamlined design. They also may have end caps, which help prevent catch points and mounting holes. This prevents bacteria from settling on the surface and helps to eliminate downtime due to contamination.hydraulic cylinders

Coating

Whether you are an engineer or an owner of hydraulic cylinders, you know the importance of protecting your components from corrosion and wear. Hydraulic cylinders are designed to perform in high temperatures and high pressures, and they can be damaged by environmental conditions or mechanical deformations. The proper coating of hydraulic cylinders is essential to reduce wear and tear, and reduce the risk of corrosion and adhesion. If your hydraulic cylinders are damaged, the result can be expensive repairs.
Hydraulic cylinders are used in a variety of industries, including automotive, aerospace, marine, oil and gas, and offshore. The cylinders are primarily designed for high cycle applications, which can increase wear. However, they can be used in other types of applications as well.
There are several coating methods available on the market. One process is the electro galvanizing process. This process involves the use of electricity to deposit a zinc coating on the hydraulic cylinder. This coating can protect the cylinder for a lifetime. There are several methods to choose from, depending on the thickness of the coating.
Another method is the electro-plating process. This method has been used to coat hydraulic cylinders for offshore applications. However, the European Union nearly banned the process due to environmental concerns. The process is also used to coat corrosion resistant nickel-based alloys. Using this technology allows companies to coat hydraulic cylinders without having to involve a coater. The process is also easy to integrate.
One alternative coating process is thermal spray. This process uses engineered materials to deposit metallic or ceramic materials onto the surface. The spray is then used to enhance the surface, restoring damaged hydraulic rods, or preventing future breakdowns. Thermal spray also increases wear life.
Another coating process is the hard chrome over nickel process. Traditionally, hard chrome plating is used on hydraulic cylinder rods. However, this method has largely fallen out of favor. The main reason for hydraulic cylinder failure is corrosion of the piston rod surface. If your cylinder is exposed to rust, you may have to replace the cylinder barrel. Using a hard chrome over nickel coating can help to prevent corrosion.
Another coating process is a nickel sub-coating. Similar to a chromium trioxide-based coating, this provides corrosion resistance. It also provides a hard surface.
These coatings can be used in various hydraulics applications, including ball valves, brake pistons, and loader cylinders on compact tractors. Despite the fact that the process provides adequate corrosion resistance, some branches will not accept it, because of the nickel leaching that may occur. Unlike a chromium trioxide-based coating, a nickel sub-coating can be used on oil-based actuators, which may be prone to wear.
There are many types of hydraulic cylinders. Each type is designed for a different application. They all have different surface properties. These properties affect seal performance, leakage, and friction. If your hydraulic cylinders are not properly coated, they may rust, damage seals, and wear out prematurely.
China Hyva Parker Custom Hoist Binotto Penta Edbro Type Multi Stage Section Big Rod Telescopic Long Stroke Hydraulic Cylinder for Lift Dump Truck Tipper Semi Trailer     hydraulic cylinder bore size chartChina Hyva Parker Custom Hoist Binotto Penta Edbro Type Multi Stage Section Big Rod Telescopic Long Stroke Hydraulic Cylinder for Lift Dump Truck Tipper Semi Trailer     hydraulic cylinder bore size chart
editor by czh 2022-11-30